Please Note: Holiday Hours: Closed 12/22/14 - 12/26/14
All orders sent by email, fax or phone will be processed upon our return 12/29/14

 
Home Products Industries Water Miser Fabrication Support Contact


 

Water Miser Battery Caps
 
 

 

 

 Part Number Height Price
 2000 Standard Height [ info] 0.955" $3.84
 2000C Medium Height [ info] 1.275" $4.78
 2000EX Extra Height [ info] 1.455" $5.38

The Water Miser 2000 is the vent cap used most often for general purpose applications. Its main advantage is the low height profile which is best used when limited space is available relative to the top of battery.

Note: For easier watering and level checking, use the Water Miser 2000C.

Most often used for Golf Carts, Industrial Battery and RV applications.

The Water Miser 2000C has two distinct advantages. This vent cap has a larger opening which makes watering and level checking much easier. The additional height also allows for extra capacity to contains any potential overflow of electrolyte during use.

The Water Miser 2000EX has the maximum capacity for potential "over-fill" situations. Most often used with batteries that are routinely wet. The 2000EX has the same size opening as the Water Miser 2000. Not recommended where limited space is a consideration.

TO ORDER: EMAIL | CALL 1 (419) 290-1103
OEM, wholesale and volume discounts available for qualifying orders
COMPARE VENT CAPS: Not sure which one is right for you? Click Here to compare
   

WATER MISER Battery Caps Save your expensive batteries by saving your water! These caps will, provided your charging equipment is properly regulated, reduce water loss by 50% to 60%. The sulfuric acid droplets being carried by the escaping gasses will be reduced by approximately 100 percent.

   
Fits all US Batteries - WATER MISER Battery Caps will fit all U.S. manufactured industrial batteries, most semi-industrial and golf cart batteries including: Exide Technologies, Dyno, Enersys, Hawker, East Penn (Deka), Crown, Trojan, Surrette / Rolls, Superior, Bulldog, Industrial Battery Engineering (IBE), US Battery, Arrow Battery and Douglas Batteries. Will not fit 4D, 8D or most standard marine batteries.
   
No Need to Ever Remove Vent Caps - With already limited access and cramped spaces, there is no need to ever remove the Water Miser Vent-Caps. Easily inspect or water your batteries, just flip open the vent cap and when finished, flip closed.
   
Less Watering - Extended watering intervals are achieved along with routine equalization of the electrolyte being drastically reduced due to the fact that very little electrolyte ever passes through the moisture return medium and hydrophobic cindered disc combination
   
Batteries Last Longer - Any residual gases that escape through the moisture retention medium during the charging cycle, carry fewer electrolyte laden droplets, assuring that electrolyte gravities are stabilized within the battery cell(s) – Thus resulting in consistency of intended cell voltages and capacity characteristics.
   
They Stay Drier - The battery and battery cell covers remain much drier with cell to cell and battery to equipment body grounding respectively reduced - this being of the utmost importance relative to today’s use of solid state electronic controllers as used on battery powered electric material handling equipment.
   
Reduced Acid Mess - The handling of acid laden vent caps is a thing of the past - the built in “anti-splash” device assures that a minimum of electrolyte is propelled into the immediate area when the “flip top” is opened for inspection or watering.
   
No Explosions - Externally initiated explosions within the battery’s cell(s) are virtually eliminated due to the incorporation of the flame and or spark retardant hydrophobic cindered disc.
   
Virtually Fume Free Batteries - The Water Miser Safety Vent affords the operator a greater safety factor as he now works in a more friendly, fume freer environment made possible by the multi-features incorporated in its comprehensive and practical design.
   
Easy to Handle - Lesser potential vulnerability to the problems of Carpal Tunnel Syndrome relative to removal and replacement of twist on vent caps during servicing and the lesser exposure to electrolyte (Sulphuric acid), as fumes and or liquid, is a factor that certainly warrants consideration - the water miser safety vent just might in some degree contribute to the area of liability avoidance.
   
Ideal for Forklift, Golf Cart, Marine, RV and Floor Scrubber Batteries - The Water Miser Safety Vent can be retro fitted to any U.S. manufactured industrial motive power forklift battery since it’s construction embodies the quarter-turn bayonet design. The majority of golf cart and floor scrubber batteries will also accept the quarter turn bayonet design.
   
Pays for Itself - Flip top design in combination with the moisture return medium / Hydrophobic Cindered Disc will more than compensate for it’s cost within the first 6 months - less watering, less equalization, less flushing and washing of the battery, the equipment and the charging station area.
   


 

 
 
 


Battery Products

Water-Miser Vent Caps
Econ-o-Flip
Bayonet Style Vent Caps
Intercell Shrouds
Shrouds
Moss Guard
Terminal Shrouds
Cell Covers
Battery Jars

 


Battery Watering

Water Rite Battery Filler
Water Rite Water Deionizer Kit


Markets / Industries

Industrial Forklift and Mine Batteries
Golf Cart Batteries
Marine Batteries
Solar Batteries
Scrubber Batteries